16 324 Kč bez DPH
HP X131 10G X2 SC LRM Transceiver (J9144A)
An X2 form-factor transceiver that supports the 10-Gigabit LRM standard, providing 10-Gigabit connectivity up to 220 m on legacy multimode fiber.
Ports:
1 SC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM)
Duplex: full only
Electrical characteristics:
Power consumption typical: 3.2 W
Power consumption maximum: 4.2 W
Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations)
Maximum distance:
0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km
Cable length: 5m to 220m
Fiber type: Multi Mode
Notes:
Wavelength: 1310nm
For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the maximum distances listed above.
For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J9144A 10-GbE X2-SC LRM Optic" on the "ProCurve 10-GbE Transceivers" Manuals Web page.
Power Consumption: 4W Max
Compatible products:
• HP 4200 vl Switch Series
• HP 8200 zl Switch Series
• HP 3500 yl Switch Series
• HP 5400 zl Switch Series
• HP 6200-24G-mGBIC yl Switch
Produkt HP ProCurve 10-GbE X2-SC LRM Optic (J9144A) se nachází v kategorii Optické moduly, výrobce HP