134 Kč bez DPH
Alpine AM4 LP - Nízkoprofilový chladič pro procesory AMD AM4, AM3(+), AM2(+), FM2(+), FM1 s výškou pouhých 42,2mm a 92mm vetráčkem PWM
Alpine AM4 LP - Low Profile AMD CPU-Cooler
Improved Cooling Performance by New Production Process
The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.
0 dB Mode
The Alpine AM4 LP is able to switch into silent passive mode when PWM signal is below 5 % due to its new motor. This allows working at your PC in complete silence without any unwanted noise.
Lower Power Consumption & Minimum Vibration
The new Alpine AM4 LP is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.
Designed especially for use in HTPCs and Mini-ITX cases
With an installation height of only 42.2 mm, the Alpine AM4 LP is particularly suitable for small and narrow housings. It is easy to assemble and allows full access to all components close to the CPU. The compact Top-Blower CPU cooler also cools areas around the CPU socket and is predestined for HTPC and Mini-ITX cases.
High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
Pre-applied MX-2 Thermal Paste
The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.
Easy and Tool-free Installation
Thanks to the mounting clips, the installation is really easy. Additional tools are not needed to install the cooler.
1151 1150 1155 1156 2066 2011(-3) 1366 775
No No No No No No No No
sTR4 AM4 AM3(+) AM2(+) AM1 FM2(+) FM1
No Yes Yes Yes No Yes Yes
Recommended for TDP up to: 75 W
Heatsink: Radial Heatsink
Diameter: 92 mm
Fan Speed: 100 - 2000 RPM (Controlled by PWM), 0 db fan mode below 5 % PWM
Bearing: Fluid Dynamic Bearing
Noise Level: 0.3 Sone
Current/Voltage: 0.08 A / 12 V